Loft Sails 2010
- Autor del tema Mr Saxo
- Fecha de inicio
JAPS
Totalwind Addicted
No blade CR for 2010?
Loft Lip Wave 2010
The Lip is hardcore regarding construction- full kevlar foot and leech panels, triple overlapping panels that form two integrated 2plys that radiate from the clew (http://www.loftsails.com/kam_pages/1/e/412.php). The Lip is slightly flatter in profile than the Wavescape, and includes our Sensitip.
The Wavescape is built without kevlar and has a singlar clew radial. It is lighter, and designed slightly fuller than the Lip.
In simple terms, the Lip is sideshore-optimized, the Wavescape onshore optimized. Both are designed to be trim-reactive. Both include our Adjustable Outhaul. The Loft AO is an extremely under-rated item! I always use it! Many slalom/freeride windsurfers are fully into it! Many wave guys do not- which I do not understand! It is as if they believe wind conditions do not change when on wave gear! The AO is the easiest way to EXPAND one`s wind range. YES, a visit to the beach to adjust the outhaul is an option- but most of us are too busy windsurfing to do that! The AO allows the rig to adapt! It makes trimming before you launch less critical, and it makes each session more fun!
The Loft 2010 Blades remain dedicated to rdm masts- as they are this year. Blades are designed specifically for rdms. Although this voids the warranty- should one rig their Blade on a sdm (if the cams are changed, and one takes extreme care (there are parameters specific to each mast type- which is why rigging with sdms voids the Blade warranty)), our tests have proven conclusively that Blades perform best on rdm masts. Blades are our dedicated high-end competition design, so we do not compromise!- Blades are rdm-specific!
The Loft 2010 Switchblades are designed with different parameters compared to our Blades, and include both rdm and sdm Tekcams in the sail bag- so that both rdm and sdm mast types are compatible.
The Loft 2010 Blade FRs (12.5, 11.8, 11.0) are also compatible with both rdms and sdms. All Blade FRs are 4-cam designs, they include 7 cams each- the lower 3 cams are sdms "out-of-the-bag", the 3 rdm cams are in the sail bag (the upper cam works with both mast types and is not changed).
Blade FRs are recommended to be used with Loft Team Edition rdm masts! On LTE rdms the Blade FRs work better, and are more friendly than when rigged on sdm masts. On our LTE rdms, the rotation ease must be experienced to be believed!
... 7-rotation
The LTE masts are resistant! Sdms and their thin walls do not react well to cam pressure- sdms can de-form under high cam pressure, and so are much more likely to break compared to rdms.
Changing cams is easy- with our new 2010 Tekcam system no spacers are needed- just change the cams and the mast!
Switchblades and Blade FRS work better on rdms, but we have to install the sdm cams in the factory (not the recommended rdm cams) because the Tekcam rdm cam is longer than the Tekcam sdm cam; should a client rig their 2010 Switchblade or Blade FR with the rdm cams installed & sdm mast, there is an incompatiblility issue: way too much cam pressure on the mast!.
If one rigs with the sdm cams (shorter) and an rdm mast (reduced diameter), the cams are very free- which makes for a very soft situation, but not a risk for rig damage.
Our new 2010 Tekcam system is an industry first!: rdm/sdm mast interchangability, out-of-the-bag!
Tekcams are simple! There are some incredibly complicated and heavy cam systems on the market- prone to breaking.
Our new Tekcams, with our industry-first MCIs (Metallic Cam Interfaces), our exclusive Blade mast pocket technology, and our Kevlar Strip construction... combine to re-define cammed rigs! These items are real design features that arguably place The Loft at the leading edge of modern windsurfing rig design!
Good winds, Monty
The Lip is hardcore regarding construction- full kevlar foot and leech panels, triple overlapping panels that form two integrated 2plys that radiate from the clew (http://www.loftsails.com/kam_pages/1/e/412.php). The Lip is slightly flatter in profile than the Wavescape, and includes our Sensitip.
The Wavescape is built without kevlar and has a singlar clew radial. It is lighter, and designed slightly fuller than the Lip.
In simple terms, the Lip is sideshore-optimized, the Wavescape onshore optimized. Both are designed to be trim-reactive. Both include our Adjustable Outhaul. The Loft AO is an extremely under-rated item! I always use it! Many slalom/freeride windsurfers are fully into it! Many wave guys do not- which I do not understand! It is as if they believe wind conditions do not change when on wave gear! The AO is the easiest way to EXPAND one`s wind range. YES, a visit to the beach to adjust the outhaul is an option- but most of us are too busy windsurfing to do that! The AO allows the rig to adapt! It makes trimming before you launch less critical, and it makes each session more fun!
The Loft 2010 Blades remain dedicated to rdm masts- as they are this year. Blades are designed specifically for rdms. Although this voids the warranty- should one rig their Blade on a sdm (if the cams are changed, and one takes extreme care (there are parameters specific to each mast type- which is why rigging with sdms voids the Blade warranty)), our tests have proven conclusively that Blades perform best on rdm masts. Blades are our dedicated high-end competition design, so we do not compromise!- Blades are rdm-specific!
The Loft 2010 Switchblades are designed with different parameters compared to our Blades, and include both rdm and sdm Tekcams in the sail bag- so that both rdm and sdm mast types are compatible.
The Loft 2010 Blade FRs (12.5, 11.8, 11.0) are also compatible with both rdms and sdms. All Blade FRs are 4-cam designs, they include 7 cams each- the lower 3 cams are sdms "out-of-the-bag", the 3 rdm cams are in the sail bag (the upper cam works with both mast types and is not changed).
Blade FRs are recommended to be used with Loft Team Edition rdm masts! On LTE rdms the Blade FRs work better, and are more friendly than when rigged on sdm masts. On our LTE rdms, the rotation ease must be experienced to be believed!
... 7-rotation
The LTE masts are resistant! Sdms and their thin walls do not react well to cam pressure- sdms can de-form under high cam pressure, and so are much more likely to break compared to rdms.
Changing cams is easy- with our new 2010 Tekcam system no spacers are needed- just change the cams and the mast!
Switchblades and Blade FRS work better on rdms, but we have to install the sdm cams in the factory (not the recommended rdm cams) because the Tekcam rdm cam is longer than the Tekcam sdm cam; should a client rig their 2010 Switchblade or Blade FR with the rdm cams installed & sdm mast, there is an incompatiblility issue: way too much cam pressure on the mast!.
If one rigs with the sdm cams (shorter) and an rdm mast (reduced diameter), the cams are very free- which makes for a very soft situation, but not a risk for rig damage.
Our new 2010 Tekcam system is an industry first!: rdm/sdm mast interchangability, out-of-the-bag!
Tekcams are simple! There are some incredibly complicated and heavy cam systems on the market- prone to breaking.
Our new Tekcams, with our industry-first MCIs (Metallic Cam Interfaces), our exclusive Blade mast pocket technology, and our Kevlar Strip construction... combine to re-define cammed rigs! These items are real design features that arguably place The Loft at the leading edge of modern windsurfing rig design!
Good winds, Monty
Loftsails product range 2010
Lip Wave Hardcore Omni-wave All sizes vario top
Lip Wave 6.2m2
Lip Wave 5.7m2
Lip Wave 5.2m2
Lip Wave 5.0m2
Lip Wave 4.7m2
Lip Wave 4.5m2
Lip Wave 4.2m2
Lip Wave 4.0m2
Lip Wave 3.7m2
Lip Wave 3.4m2
Lip Wave 3.1m2
Lip Wave 2.8m2
Wavescape Crossover All sizes vario top
Wavescape 6.8m2
Wavescape 6.2m2
Wavescape 5.8m2
Wavescape 5.2m2
Wavescape 4.7m2
Wavescape 4.2m2
Wavescape 3.8m2
O2 Freeride Performance Freeride 9.6 & 8.4 fixed top, smaller sizes vario top
O2 Freeride 9.6m2
O2 Freeride 8.4m2
O2 Freeride 7.4m2
O2 Freeride 6.6m2
O2 Freeride 5.9m2
O2 Freeride 5.3m2
Advance Freeride 6.5 fixed top, smaller sizes vario top
Advance 6.5m2
Advance 5.8m2
Advance 5.1m2
Advance 4.5m2
Advance 4.0m2
Advance 3.5m2
Advance 3.0m2
Advance 2.5m2
Advance 2.0m2
Switchblade Performance Freerace 2cam 5.8 vario top, larger sizes fixed top
Switchblade 9.3m2
Switchblade 8.5m2
Switchblade 7.8m2
Switchblade 7.3m2
Switchblade 6.8m2
Switchblade 6.3m2
Switchblade 5.8m2
Blade Competition Pure, Speed & Slalom All sizes fixed top
Blade 9.7m2
Blade 9.0m2
Blade 8.3m2
Blade 7.8m2
Blade 7.0m2
Blade 6.3m2
Blade 5.5m2
Blade 4.8m2
Blade FR Formula Racing All sizes fixed top
Blade FR 12.5m2
Blade FR 11.8m2
Blade FR 11.0m2
Blade RB Longboard Racing All sizes fixed top
Blade RB 7.5m2
Blade RB 9.5m2
Lip Wave Hardcore Omni-wave All sizes vario top
Lip Wave 6.2m2
Lip Wave 5.7m2
Lip Wave 5.2m2
Lip Wave 5.0m2
Lip Wave 4.7m2
Lip Wave 4.5m2
Lip Wave 4.2m2
Lip Wave 4.0m2
Lip Wave 3.7m2
Lip Wave 3.4m2
Lip Wave 3.1m2
Lip Wave 2.8m2
Wavescape Crossover All sizes vario top
Wavescape 6.8m2
Wavescape 6.2m2
Wavescape 5.8m2
Wavescape 5.2m2
Wavescape 4.7m2
Wavescape 4.2m2
Wavescape 3.8m2
O2 Freeride Performance Freeride 9.6 & 8.4 fixed top, smaller sizes vario top
O2 Freeride 9.6m2
O2 Freeride 8.4m2
O2 Freeride 7.4m2
O2 Freeride 6.6m2
O2 Freeride 5.9m2
O2 Freeride 5.3m2
Advance Freeride 6.5 fixed top, smaller sizes vario top
Advance 6.5m2
Advance 5.8m2
Advance 5.1m2
Advance 4.5m2
Advance 4.0m2
Advance 3.5m2
Advance 3.0m2
Advance 2.5m2
Advance 2.0m2
Switchblade Performance Freerace 2cam 5.8 vario top, larger sizes fixed top
Switchblade 9.3m2
Switchblade 8.5m2
Switchblade 7.8m2
Switchblade 7.3m2
Switchblade 6.8m2
Switchblade 6.3m2
Switchblade 5.8m2
Blade Competition Pure, Speed & Slalom All sizes fixed top
Blade 9.7m2
Blade 9.0m2
Blade 8.3m2
Blade 7.8m2
Blade 7.0m2
Blade 6.3m2
Blade 5.5m2
Blade 4.8m2
Blade FR Formula Racing All sizes fixed top
Blade FR 12.5m2
Blade FR 11.8m2
Blade FR 11.0m2
Blade RB Longboard Racing All sizes fixed top
Blade RB 7.5m2
Blade RB 9.5m2
Following sizes are available for 2010
in color full white, white/red, white/orange, white/blue,
4.9, 5.6, 6.3, 7.0, 7.7, 8.3, 9.0, 9.7 Blade -> Raceslalom
11.0, 11.8, 12.5 Blade FR -> Formula
The Blades are also available in Pentex version
in color full white, white/red, white/orange, white/blue,
4.9, 5.6, 6.3, 7.0, 7.7, 8.3, 9.0, 9.7 Blade -> Raceslalom
11.0, 11.8, 12.5 Blade FR -> Formula
The Blades are also available in Pentex version
